Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T12:04:02.368Z Has data issue: false hasContentIssue false

Electromigration in Submicron Dual-damascene Cu/low-k Interconnects

Published online by Cambridge University Press:  01 February 2011

Ki-Don Lee
Affiliation:
Univ. of Texas at Austin, Microelectronics Research Center, PRC, Austin, TX 78712
Xia Lu
Affiliation:
Univ. of Texas at Austin, Microelectronics Research Center, PRC, Austin, TX 78712
Ennis T. Ogawa
Affiliation:
Univ. of Texas at Austin, Microelectronics Research Center, PRC, Austin, TX 78712
Hideki Matsuhashi
Affiliation:
Univ. of Texas at Austin, Microelectronics Research Center, PRC, Austin, TX 78712
Volker A. Blaschke
Affiliation:
International SEMATECH, 2706 Montopolis Dr., Austin, TX 78741-6499
Rod Augur
Affiliation:
International SEMATECH, 2706 Montopolis Dr., Austin, TX 78741-6499
Paul S. Ho
Affiliation:
Univ. of Texas at Austin, Microelectronics Research Center, PRC, Austin, TX 78712
Get access

Abstract

Electromigration (EM) lifetime characteristics and failure mechanism were investigated for Cu/porous-low-k interconnects and compared to Cu/oxide. The porous low-k dielectric was JSR LKD-5109TM, an MSQ-based spin-on organosilicate material with k = 2.2. The activation energies for EM failure were found to be 0.9 - 1.0 eV for the porous MSQ and 0.8 eV for oxide while the current density exponents for both materials were found to be similar, 1.2 - 1.3. This range of activation energies are commonly associated with mass transport at the Cu/cap-layer interface and suggest a similar mass transport mechanism; interfacial diffusion. Porous MSQ structures showed the same distinct failure morphology as observed in other Cu/low-k interconnects: voiding at the cathode and lateral Cu extrusion at the anode under the cap layer, which seems to be related to the thermo-mechanical properties of Cu/low-k interconnects. The shorter lifetime characteristics of Cu/low-k interconnects comparing to Cu/oxide can be attributed to a smaller back stress, due to less thermomechanical confinement. Results of this study indicate that thermo-mechanical properties of low-k interconnects are important parameters in controlling EM reliability of Cu/low-k interconnects.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable