Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T07:43:23.836Z Has data issue: false hasContentIssue false

Electromigration of Electroplated Gold Interconnects

Published online by Cambridge University Press:  01 February 2011

Steve Kilgore
Affiliation:
Intrinsic Reliability Engineering Laboratory, Freescale Semiconductor, Inc. Tempe, AZ 85284, U.S.A.
Craig Gaw
Affiliation:
Intrinsic Reliability Engineering Laboratory, Freescale Semiconductor, Inc. Tempe, AZ 85284, U.S.A.
Haldane Henry
Affiliation:
Intrinsic Reliability Engineering Laboratory, Freescale Semiconductor, Inc. Tempe, AZ 85284, U.S.A.
Darrell Hill
Affiliation:
Intrinsic Reliability Engineering Laboratory, Freescale Semiconductor, Inc. Tempe, AZ 85284, U.S.A.
Dieter Schroder
Affiliation:
Intrinsic Reliability Engineering Laboratory, Freescale Semiconductor, Inc. Tempe, AZ 85284, U.S.A.
Get access

Abstract

Electromigration tests were performed on passivated electroplated Au four terminal Kelvin line structures using the conventional in situ resistance monitoring technique. The stress conditions were a current density of 2.0 MA/cm2 with ambient temperatures ranging from 325°C to 375°C. The temperature coefficients of resistance (TCR) values were measured prior to current stressing to calculate the Joule heated film temperatures. The times to failure (lifetimes) for the Au line structures were considered as a 50% ΔR/R0 change. The median time to failure (t50%) was plotted against the inverse film temperature to determine the activation energy value as 0.59 ± 0.09 eV. Failure analysis of void location and suggested diffusion mechanism will be discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable