Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T07:56:50.783Z Has data issue: false hasContentIssue false

Enabling High-Throughput, Low-Cost Manufacturing of OLED Display and Lighting Panels

Published online by Cambridge University Press:  31 January 2011

Michael Long
Affiliation:
disruptive.tech.solutions@hotmail.com, Eastman Kodak Company, OLED Business Unit, Rochester, New York, United States
Bruce E Koppe
Affiliation:
bruce.koppe@kodak.com, Eastman Kodak Company, OLED Business Unit, Rochester, New York, United States
Neil P Redden
Affiliation:
neil.redden@kodak.com, Eastman Kodak Company, OLED Business Unit, Rochester, New York, United States
Michael L Boroson
Affiliation:
michael.boroson@kodak.com, Eastman Kodak Company, OLED Business Unit, Rochester, New York, United States
Tukaram K Hatwar
Affiliation:
tukaram.hatwar@kodak.com, Eastman Kodak Company, OLED Business Unit, Rochester, New York, United States
John W Hamer
Affiliation:
john.hamer@kodak.com, Eastman Kodak Company, OLED Business Unit, Rochester, New York, United States
Get access

Abstract

Large-scale manufacturing of organic light-emitting diode (OLED) panels for lighting and display has been slowed by several manufacturing factors, prominent among which are low throughput due in part to the fine metal mask technology for patterning the red-, green-, and blue-light-emitting pixels and low materials utilization efficiency of the available vacuum deposition technology. To overcome these impediments to low-cost OLED manufacturing, Kodak developed a blanket white-emitting OLED architecture in combination with a pixilated color filter array to eliminate the need for fine metal masks and developed a vacuum deposition technology capable of high deposition rates and high materials utilization efficiency. These developments, taken together, allow much higher throughput and yield on fifth-generation and larger substrates that promise to enable low-cost manufacturing of OLED displays and lighting panels. This paper focuses on the deposition technology Kodak developed, a flash vaporization process that can deliver very high materials utilization efficiency at high deposition rates for small-molecule OLED materials without increasing material decomposition.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable