Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T16:32:33.981Z Has data issue: false hasContentIssue false

Enhanced Degradation in P+-Poly PMOSFETs With Oxynitride Gate Dielectrics Under Hot-Hole Injection

Published online by Cambridge University Press:  10 February 2011

Y. Y. Chen
Affiliation:
Microelectronics Research Center, Department of Electrical and Computer Engineering The University of Texas, Austin, TX 78712, (512) 471-1016, yc10@mail.utexas.edu
M. Gardner
Affiliation:
Advanced Micro Devices, Austin, TX 78741
J. Fulford
Affiliation:
Advanced Micro Devices, Austin, TX 78741
D. Wristers
Affiliation:
Advanced Micro Devices, Austin, TX 78741
A. B. Joshi
Affiliation:
Conexant Systems Inc., Newport Beach, CA 92658
D. L. Kwong
Affiliation:
Microelectronics Research Center, Department of Electrical and Computer Engineering The University of Texas, Austin, TX 78712, (512) 471-1016, yc10@mail.utexas.edu
Get access

Abstract

In this paper, a significant degradation under hot hole injection is observed in P+ -poly PMOSFETs with oxynitride gate dielectrics. In our study, both oxynitrides formed by gate oxide grown on Nitrogen Implanted Si Substrates (NISS) and NO-annealed SiO2 oxynitride gate dielectrics are used and compared to control SiO2 gate dielectrics of identical thicknesses. A physical model responsible for such enhanced degradation in PMOSFETs with oxynitride gate dielectric is proposed. It is shown that the hole injection barrier lowering as a result of the nitrogen-rich layer at the SiO2/Si interface in oxynitride is responsible for such enhanced degradation.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable