Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T14:50:09.861Z Has data issue: false hasContentIssue false

Evaluation of Sulfidation Resistance of Atomized Fe40Al Based Intermetallics

Published online by Cambridge University Press:  31 January 2012

M. A. Espinosa-Medina*
Affiliation:
Facultad de Ingeniería Mecánica, UMSNH, C.P. 58000, Morelia, Mich., México.
G. Carbajal de la Torre
Affiliation:
Facultad de Ingeniería Mecánica, UMSNH, C.P. 58000, Morelia, Mich., México.
A. Martínez-Villafañe
Affiliation:
CIMAV, Complejo Industrial Chihuahua, Chihuahua. México.
J.G. González-Rodríguez
Affiliation:
UAEM-CIICAP, Av. Universidad 1001, Col. Chamilpa, Cuernavaca, Morelos, México.
Get access

Abstract

The isothermal oxidation-sulfidation of Fe-40Al based intermetallics alloys in N2/SO2 gas mixture at 625, 700 and 775°C were evaluated. Fe40Al, Fe40Al+0.1B, Fe40Al+0.1B+10Al2O3 alloys were produced by atomization and deposition. Isothermal gas exposition was reached during 48 hours. FeAl based alloys showed good sulfidation resistance, presenting both small weight gain and weight change fluctuations. At 625°C, the Fe40Al+0.1B alloy had the biggest weight gain; on the other hand the Fe40Al alloy exhibited the biggest sulfidation resistance. At 700 and 775°C, the Fe40Al+0.1B alloy presented the smallest weight gain, however Fe40Al alloy presented higher weight gain, that is to say, the smallest sulfidation resistance at those temperatures. The variation in the weight gain curves were discussed in terms of formation and detachment of sulfides, and by local attack on the alloy surface as the temperature increasing. The results are supplemented with characterization by SEM and analysis of X-rays dispersion.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable