Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T13:30:39.582Z Has data issue: false hasContentIssue false

Experimental Determination of the Strain Transfer Across a Flexible Intermediate Layer in Thin Film Structures as a Function of Flexible Layer Thickness

Published online by Cambridge University Press:  22 February 2011

L. S. Schadler
Affiliation:
IBM Research Division, T. J.Watson Research Center, PO Box 218, Yorktown Heights, NY 10598
I. C. Noyan
Affiliation:
IBM Research Division, T. J.Watson Research Center, PO Box 218, Yorktown Heights, NY 10598
Get access

Abstract

The tensile deformation behavior of nickel/ polyimide-thin-film / copper-thin-film structures is observed using an in situ x-ray stress analysis technique. The x-ray stress is measured in the nickel and the copper simultaneously. From the analysis, the stress/strain transfer from the nickel through the polyimide to the copper can be measured.

The effect of polyimide thickness (in the range from no polyimide to 33μm of polyimide) on the stress/strain transfer behavior is reported here.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable