Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T01:09:10.034Z Has data issue: false hasContentIssue false

Experimental Investigation of Thin Film InGaAsP Coolers

Published online by Cambridge University Press:  01 February 2011

Christopher J. LaBounty
Affiliation:
Electrical and Computer Engineering, University of California, Santa Barbara, CA 93106
Ali Shakouri
Affiliation:
Jack Baskin School of Engineering, University of California, Santa Cruz, CA 95046
Gerry Robinson
Affiliation:
Electrical and Computer Engineering, University of California, Santa Barbara, CA 93106
Luis Esparza
Affiliation:
Electrical and Computer Engineering, University of California, Santa Barbara, CA 93106
Patrick Abraham
Affiliation:
Electrical and Computer Engineering, University of California, Santa Barbara, CA 93106
John E. Bowers
Affiliation:
Electrical and Computer Engineering, University of California, Santa Barbara, CA 93106
Get access

Abstract

Most optoelectronic devices for long haul optical communications are based on the InP/InGaAsP family of materials. Thin film coolers based on the same material system can be monolithically integrated with optoelectronic devices such as lasers, switches, and photodetectors to control precisely the device characteristics such as wavelength and optical power. Superlattice structures of InGaAs/InP and InGaAs/InGaAsP are used to optimize the thermionic emission resulting in a cooling behavior beyond what is possible with only the Peltier effect. A careful experimental study of these coolers is undertaken. Mesa sizes, superlattice thickness, and ambient temperature are all varied to determine their effect on cooling performance. A three-dimensional, self-consistent thermal-electric simulation and an effective one-dimensional model are used to understand the experimental observations and to predict what will occur for other untested parameters. The packaging of the coolers is also determined to have consequences in the overall device performance. Cooling on the order of 1 to 2.3 degrees over 1-micron thick barriers is reported.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable