Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T16:58:47.852Z Has data issue: false hasContentIssue false

Fabrication of high-performance photodetector based on AlGaN/GaN hetero-field-effect transistors with p-GaN gate

Published online by Cambridge University Press:  01 February 2011

Shuichi Miura
Affiliation:
m0634044@ccmailg.meijo-u.ac.jp, Meijo University, Department of Materials Science and Engineering, 1-501 Shiogamaguchi, Tempaku-ku, Nagoya, 468-8502, Japan, +81-52-838-2430, +81-52-832-1244
Takahiro Fujii
Affiliation:
m0634040@ccmailg.meijo-u.ac.jp, Meijo University, Department of Materials Science and Engineering, 21st COE "Nano-factory", 1-501 Shiogamaguchi, Tempaku-ku, Nagoya, 468-8502, Japan
Motoaki Iwaya
Affiliation:
iwaya@ccmfs.meijo-u.ac.jp, Meijo University, Department of Materials Science and Engineering, 21st COE "Nano-factory", 1-501 Shiogamaguchi, Tempaku-ku, Nagoya, 468-8502, Japan
Satoshi Kamiyama
Affiliation:
skami@ccmfs.meijo-u.ac.jp, Meijo University, Department of Materials Science and Engineering, 21st COE "Nano-factory", 1-501 Shiogamaguchi, Tempaku-ku, Nagoya, 468-8502, Japan
Hiroshi Amano
Affiliation:
amano@ccmfs.meijo-u.ac.jp, Meijo University, Department of Materials Science and Engineering, 21st COE "Nano-factory", 1-501 Shiogamaguchi, Tempaku-ku, Nagoya, 468-8502, Japan
Isamu Akasaki
Affiliation:
akasaki@ccmfs.meijo-u.ac.jp, Meijo University, Department of Materials Science and Engineering, 21st COE "Nano-factory", 1-501 Shiogamaguchi, Tempaku-ku, Nagoya, 468-8502, Japan
Get access

Abstract

An AlGaN/GaN photo-hetero-field-effect transistor (photo-HFET) with a p-type GaN gate was fabricated and its properties were compared with those of a HFET without a p-type GaN layer. The photo-HFET with a p-GaN gate exhibited a high signal-to-noise ratio of five orders of magnitude and a dark current density of 10 nA/mm at a drain-source bias of 5 V. In contrast, when the photo-HFET was irradiated with 365 nm (490 μW/cm2) UV light, a photocurrent of over 1 mA/mm was achieved. The responsivity of the device was over 1 × 105 A/W.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable