Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T05:04:07.936Z Has data issue: false hasContentIssue false

First-Principles Studies of γ-Tial Based Ternary Alloys

Published online by Cambridge University Press:  22 February 2011

W. Wolf
Affiliation:
Institute for Physical Chemistry of the University of Vienna, Waehringerstrasse 42, A-1090 Vienna, Austria
R. Podloucky
Affiliation:
Institute for Physical Chemistry of the University of Vienna, Waehringerstrasse 42, A-1090 Vienna, Austria
P. Rogl
Affiliation:
Institute for Physical Chemistry of the University of Vienna, Waehringerstrasse 42, A-1090 Vienna, Austria
Get access

Abstract

Self-consistent total energy calculations were performed to investigate the effects of ternary additions of 3d, 4d and 5d transition metal elements (V, Cr, Mn, Fe, Co, Ni, Zr, Nb, Mo, Tc, Ru, Rh, Pd, Hf, Ta, W, Re, Os, Ir, Pt) to Ll0 ordered γ-TiAl. In general, we studied ordered solids of 4 atoms per unit cell. In the case of Mn additions larger supercells with up to 32 atoms were also treated. Minimizing the total energy with respect to volume and c/a ratio leads to the determination of lattice distortions due to alloying by the ternary elements. These distortions prove to be strongly dependent on whether the alloying element substitutes Al or Ti atoms. Furthermore, the site preference can be derived by comparing the formation energies of Tin-1XAln and Tin XAln-i, where X is the substituting element. As a result the change of the geometry of L10 TiAl due to alloying can be estimated and may thereby give insight into the conditions at semicoherent γ/γ′ and α2/γ interfaces, which are associated to be responsible for ductility improvements of γ-TiAl based alloys.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable