Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T10:36:39.898Z Has data issue: false hasContentIssue false

Flexible Thermoelectric Devices Based on Indium Phosphide Nanowire Networks on Copper

Published online by Cambridge University Press:  29 August 2014

Kate J. Norris
Affiliation:
Baskin School of Engineering, University of California Santa Cruz, Santa Cruz, CA 95064 U.S.A.Nanostructured Energy Conversion Technology and Research (NECTAR), Advanced Studies Laboratories, Univ. of California Santa Cruz – NASA Ames Research Center, Moffett Field, CA 94035, U.S.A.
Brian Tuan
Affiliation:
The Harker School, San Jose, CA, United States.
Elane Coleman
Affiliation:
Structured Materials Industries, Inc., Piscataway, NJ, United States.
David M. Fryauf
Affiliation:
Baskin School of Engineering, University of California Santa Cruz, Santa Cruz, CA 95064 U.S.A.Nanostructured Energy Conversion Technology and Research (NECTAR), Advanced Studies Laboratories, Univ. of California Santa Cruz – NASA Ames Research Center, Moffett Field, CA 94035, U.S.A.
Junce Zhang
Affiliation:
Baskin School of Engineering, University of California Santa Cruz, Santa Cruz, CA 95064 U.S.A.Nanostructured Energy Conversion Technology and Research (NECTAR), Advanced Studies Laboratories, Univ. of California Santa Cruz – NASA Ames Research Center, Moffett Field, CA 94035, U.S.A.
Gary S. Tompa
Affiliation:
Structured Materials Industries, Inc., Piscataway, NJ, United States.
Nobuhiko P. Kobayashi
Affiliation:
Baskin School of Engineering, University of California Santa Cruz, Santa Cruz, CA 95064 U.S.A.Nanostructured Energy Conversion Technology and Research (NECTAR), Advanced Studies Laboratories, Univ. of California Santa Cruz – NASA Ames Research Center, Moffett Field, CA 94035, U.S.A.
Get access

Abstract

More than 50% of total input energy is wasted as heat in various industrial processes. If we could harness a small fraction of the waste heat while satisfying the economic demands of cost versus performance, then thermoelectric (TE) power generation could bring substantial positive impacts. To meet these demands single-crystal semiconductor nanowire networks have been investigated as a method to achieve advanced TE devices because of their predicted large reduction in thermal conductivity and increase in power factor.

To further our goal of developing practical and economical TE devices, we designed and developed a material platform that combined a semiconductor nanowire network and a semiconductor thin film integrated directly on a mechanically flexible metallic substrate. We assessed the potential of this platform by using indium phosphide (InP) nanowire networks and a doped poly-silicon (poly-Si) thin film combined on copper sheets. InP nanowires were grown by metal organic chemical vapor deposition (MOCVD). In the nanowire network, InP nanowires were grown in three-dimensional networks in which electrical charges and heat travel under the influence of their characteristic scattering mechanisms over a distance much longer than the mean length of the constituent nanowires. Subsequently, plasma-assisted CVD was utilized to form a poly-Si thin film to prevent electrical shorting when an ohmic copper top contact was made. An additional facet to this design is the utilization of multiple materials to address the various temperature ranges at which each material is most efficient at heat-to-energy conversion. The utilization of multiple materials could enable the enhancement of total power generation for a given temperature gradient. We investigated the use of poly-Si thin films combined with InP nanowires to enhance TE properties. TE power production and challenges of a large area nanowire device on a flexible metallic substrate were presented.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable