Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-19T00:31:42.776Z Has data issue: false hasContentIssue false

Formation and Stability of the Prismatic Stacking Faultin Wurtzite (Al,Ga,In) Nitrides

Published online by Cambridge University Press:  03 September 2012

A. Béré
Affiliation:
Laboratoire d'Etudes et de Recherches sur les Matériaux –Institut des Sciences de la Matière et du Rayonnement, UPRESA-CNRS 6004, 6 Bd Maréchal Juin, 14050 Caen Cedex, France
G. Nouet
Affiliation:
Laboratoire d'Etudes et de Recherches sur les Matériaux –Institut des Sciences de la Matière et du Rayonnement, UPRESA-CNRS 6004, 6 Bd Maréchal Juin, 14050 Caen Cedex, France
Get access

Abstract

The formation of the {1210} stacking fault, which has two atomic configurations in wurtzite (Ga,Al,In)N, has been investigated by high resolution electron microscopy and energetic calculations. It originates from steps at the SiC surface and it can form on a flat (0001) sapphire surface. A modified Stillinger-Weber potential was used in order to investigate the relative stability of the two atomic configurations. They have comparable energy in AlN, whereas the 1/2<10 11>{1 210} configuration is more stable in GaN and InN. In GaN layers, only the 1/2<10 11>{1 210} configuration was observed. The 1/6<20 2 3> configuration was found in small areas inside the AlN buffer layer where it folded rapidly to the basal plane, and when back into the prismatic plane, it took the 1/2<10 11>{1 210} atomic configuration.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable