Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T08:26:24.345Z Has data issue: false hasContentIssue false

Formation of Biaxially Textured MgO Buffer Layers using Ion-Beam Assisted Pulsed Laser Deposition

Published online by Cambridge University Press:  18 March 2011

Ruben Hühne
Affiliation:
Institut für Kristallographie und Festkörperphysik, Technische Universitét Dresden, D-01062 Dresden, Germany
Christoph Beyer
Affiliation:
Institut für Kristallographie und Festkörperphysik, Technische Universitét Dresden, D-01062 Dresden, Germany
Bernhard Holzapfel
Affiliation:
Institut für Metallische Werkstoffe, IFW Dresden, D-01171 Dresden, Germany
Carl-Georg Oertel
Affiliation:
Institut für Kristallographie und Festkörperphysik, Technische Universitét Dresden, D-01062 Dresden, Germany
Ludwig Schultz
Affiliation:
Institut für Metallische Werkstoffe, IFW Dresden, D-01171 Dresden, Germany
Werner Skrotzki
Affiliation:
Institut für Kristallographie und Festkörperphysik, Technische Universitét Dresden, D-01062 Dresden, Germany
Get access

Abstract

MgO thin films were deposited on amorphous substrates using ion-beam assisted pulsed laser deposition. The texture formation was investigated in-situ with RHEED. The microstructure of the films was observed by AFM. Using an ion beam at an angle of 55° with respect to the substrate normal, strong nucleation textures develop. Above 250°C a cube texture is observed in films thinner than 10 nm. During further growth this nucleation texture changes in a way that the <200> direction becomes parallel to the ion beam. This change can be explained by the anisotropic sputter rate of MgO found in sputter experiments on single crystals. Moreover, MgO films were deposited homoepitaxially on MgO single crystals above 250°C with internal stresses dreasing with increasing deposition temperature. This result gives rise to hope that homoepitaxial growth of MgO on the nucleation layer without ion-beam assistance should be possible in future PLD-experiments keeping the desired cube texture in thicker films.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable