Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T10:20:42.641Z Has data issue: false hasContentIssue false

Glass-Oxide Nanocomposites as Effective Thermal Insulation Materials

Published online by Cambridge University Press:  25 November 2013

Qing Hao
Affiliation:
Aerospace & Mechanical Engineering, University of Arizona, 1130 N Mountain Ave, Tucson, AZ 85721, U.S.A.
Minqing Li
Affiliation:
Aerospace & Mechanical Engineering, University of Arizona, 1130 N Mountain Ave, Tucson, AZ 85721, U.S.A.
Garrett Joseph Coleman
Affiliation:
Materials Science & Engineering, University of Arizona, 1235 E. James E. Rogers Way, Tucson, AZ 85721, U.S.A.
Qiang Li
Affiliation:
Aerospace & Mechanical Engineering, University of Arizona, 1130 N Mountain Ave, Tucson, AZ 85721, U.S.A.
Pierre Lucas
Affiliation:
Materials Science & Engineering, University of Arizona, 1235 E. James E. Rogers Way, Tucson, AZ 85721, U.S.A.
Get access

Abstract

With extremely disordered atomic structures, a glass possesses a thermal conductivity k that approaches the theoretical minimum of its composition, known as the Einstein’s limit.1 Depending on the material composition and the extent of disorder, the thermal conductivity of some glasses can be down to 0.1-0.3 W/m∙K at room temperature,2,3 representing some of the lowest k values among existing solids. Such a low k can be further reduced by the interfacial phonon scattering within a nanocomposite that can be used for thermal insulation applications. In this work, nanocomposites hot pressed from the mixture of glass nanopowder (GeSe4 or Ge20Te70Se10) and commercial SiO2 nanoparticles, or pure glass nanopowder, are investigated for the potential k reduction. It is found that adding SiO2 nanoparticles will instead increase k if the measured k values for usually porous nanocomposites are converted into those for the corresponding solid (k Solid) with Eucken’s formula. In contrast, pure glass nano-samples always show k Solid data significantly reduced from that for the starting glass. For a pure GeSe4 nano-sample, k Solid would beat the Einstein’s limit for its composition.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable