Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T11:45:06.208Z Has data issue: false hasContentIssue false

Grain Boundary Structures in High-Purity Al2O3 Bicrystals Grown From the Melt

Published online by Cambridge University Press:  28 February 2011

P.A. Morris
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
R.L. Coble
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Get access

Abstract

The clean room processing, firing and crystal growth techniques required to produce high-purity Al2O3 crystals and bicrystals with [2110] tilt boundaries near low Σ misorientations are described. The chemical analysis requirements for high-purity ceramic materials are discussed. The boundary characteristics of the θ=33.2°, near Σ = 11, misorientation and the applicability of the CSL model to describe the observed facet planes is determined. The periodicity of the dislocations present in the boundary is 21 nm. STEM analysis of the grain boundary region indicates no second phase or detectable impurity concentrations. The importance of gra in boundary structure investigations in high-purity materials and of chemically well-characterized boundaries is discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable