Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T13:16:23.362Z Has data issue: false hasContentIssue false

Grain Refinement for Strengthening in Fe3Al-based Alloys Through Thermomechanical Processing

Published online by Cambridge University Press:  01 February 2011

Satoru Kobayashi
Affiliation:
kobayashi@imr.tohoku.ac.jp, Tohoku University, Osaka, Japan
Akira Takei
Affiliation:
cm0504@mtr.osakafu-u.ac.jp, Osaka Prefecture University, Osaka, Japan
Takayuki Takasugi
Affiliation:
takasugi@mtr.osakafu-u.ac.jp, Osaka Prefecture University, Osaka, Japan
Get access

Abstract

A thermomechanical process (TMP) for grain refinement was performed in bulk Fe3Al-based alloys containing ˜10% volume fraction of κ-Fe3AlC precipitates. In the TMP, κ particles play an important role in reducing the inhomogeneity of recrystallization due to the matrix orientation. The grain size was refined to ˜20 μm by optimizing the κ particle size. A fine-grained and pancake/recovered microstructure fabricated by the TMP showed more than 1200 MPa tensile strength and 8% tensile ductility at room temperature in air. The tensile strength of this material was higher than those of conventional wrought Fe3Al alloys at temperatures between room temperature and 500 °C, and the specific tensile strength was as high as that of the Ti-6Al-4V alloy at temperatures above 400 °C.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable