Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-15T23:10:22.004Z Has data issue: false hasContentIssue false

Hall-Petch Basis for Assessing Alloy Strengthening

Published online by Cambridge University Press:  15 February 2011

Ronald W. Armstrong
Affiliation:
Department of Mechanical Engineering, University of Maryland,College Park, MD 20742
R. Michael Douthwaite
Affiliation:
Materials Division, University of Newcastle Upon Tyne, NEl 7RU, Great Britain
Get access

Abstract

The Hall-Petch relation σ = σo + kl−½ , provides for the separate consideration of friction stress strengthening within the polycrystal grain volumes through σo and grain boundary strengthening through the product of the microstructural stress intensity k and the reciprocal square root of the grain diameter l Smaller grain diameters are normally obtained at higher alloy contents as illustrated for yield strength results reported for different face-centered-cubic Al-Mg alloys. Results on Al-Li alloy give an interesting example of substantial grain boundary strengthening that is associated with reduced ductility of the material. More complete results reported for the Cu-Al system, allow an evaluation of the strengthening component dependencies on alloy composition, in particular, connecting with a predicted square root of grain boundary obstacle stress in k. The much studied Cu-Zn alloys bring out subtle changes in σo and k

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable