Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T10:01:08.608Z Has data issue: false hasContentIssue false

Helically Perforated Thin Films -- Dependence of MechanicalProperties on Microstructure

Published online by Cambridge University Press:  26 February 2011

Sumudu P. Fernando
Affiliation:
sumudu@ualberta.ca, University of Alberta, Electrical and Computer Engineering, University of Alberta, ECERF, 9107 - 116 St., Edmonton AB, Edmonton, T6J1P3, Canada
Anastasia L. Elias
Affiliation:
sumudu@ualberta.ca, University of Alberta, Electrical and Computer Engineering, University of Alberta, ECERF, 9107 - 116 St., Edmonton AB, Edmonton, T6J1P3, Canada
Michael J. Brett
Affiliation:
sumudu@ualberta.ca, University of Alberta, Electrical and Computer Engineering, University of Alberta, ECERF, 9107 - 116 St., Edmonton AB, Edmonton, T6J1P3, Canada
Get access

Abstract

The effects of several microstructural parameters on the mechanicalbehaviour of a helically perforated thin film structure, or inversemicrospring, were investigated using a finite element model[1]. Theparameters investigated were the helical pitch angle, the cross-sectionradius, and the coil spacing. The elastic modulus was found to depend moststrongly on the helical pitch angle (changing by a factor of 1.3 as thepitch angle went from 35° to 70°). Variations in the coil radius and thefilm thickness had a minor effect on the modulus. It was also found thatusing a finite size model (as opposed to an infinite model using periodicboundary conditions) produced better conditioned results. A preliminaryconfirmation of the model's validity was performed by comparison tonanoindentation results of a nickel helically perforated thin film.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable