Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T08:11:14.486Z Has data issue: false hasContentIssue false

Heteroepitaxy on (001) Silicon: Growth Mechanisms and Defect Formation.

Published online by Cambridge University Press:  28 February 2011

P. Pirouz
Affiliation:
Department of Materials Science and Engineering, Case Western Reserve University, Cleveland, OHIO 44106
F. Ernst
Affiliation:
Department of Materials Science and Engineering, Case Western Reserve University, Cleveland, OHIO 44106
T. T. Cheng
Affiliation:
Department of Materials Science and Engineering, Case Western Reserve University, Cleveland, OHIO 44106
Get access

Abstract

In the growth of thin films of compound semiconductors on (001) silicon substrates by vapor deposition techniques, it is usual to employ a two-step process. In this method, an initial (buffer) layer is first grown at a relatively low temperature; once a continuous film has formed on the substrate, its temperature is raised for the subsequent bulk growth. Carrying out the growth in a one-step process by heating the substrate to the final temperature before allowing the gases into the CVD reactor usually results in a polycrystalline aggregate. In this paper, classical nucleation and growth mechanisms are used to explain-the reasons for the different morphology of the one-step and two-step growth films.

The heteroepitaxial films on (001) silicon often contain a high density of stacking faults and twins. The occurrence of these planar defects is usually attributed to stresses that arise from lattice mismatch and/or thermal mismatch (differences in coefficients of thermal expansion) between the substrate and the epilayer. It is argued that, in fact, mismatch stresses play a minor role in the generation of planar defects. Instead, an alternative mechanism for their formation is proposed which is based on the facetted shape of nuclei and errors in stacking of {111} planes which occur during deposition on the facets.

Conventional and high resolution transmission electron microscopy have been used to investigate three systems grown by CVD or MOCVD: SiC/Si, GaAs/Si and GaP/Si. These systems have different lattice and thermal mismatches, and the results support the proposed model for the formation of defects.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable