Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T03:43:09.757Z Has data issue: false hasContentIssue false

High Energy Ion Beam Mixing in Al2 O3 *

Published online by Cambridge University Press:  25 February 2011

M. B. Lewis
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, (USA)
C. J. Mchargue
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, (USA)
Get access

Abstract

The ion beam mixing technique has been employed to mix metal atoms into the surface layers of Al2O3. Ion beams of Fe+ and Zr+ in the 1 to 4 MeV energy range were used to irradiate Al2O3 specimens on the surfaces of which films of chromium or zirconium had been evaporated. Some specimens were irradiated at elevated temperatures of 873 or 1173 K. Rutherford backscattering (RBS) and channeling methods were used to measure the metal atom depth profiles near the surface. Analyses of the backscattering data included binary collision calculations using the codes TRIM and MARLOWE. The significance and limitations of high energy (>1 MeV) beams for ion beam mixing experiments is discussed. Evidence was found for radiation enhanced diffusion and/or solubility of zirconium and chromium in Al2O3 at 873 K.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable