Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-19T01:09:27.170Z Has data issue: false hasContentIssue false

High Frequency Dielectric Response of Calcium Aluminate Cements: Potential Packaging Substrate Materials

Published online by Cambridge University Press:  21 February 2011

Paul Sliva
Affiliation:
The Pennsylvania State University, Materials Research Laboratory, University Park, PA 16802
M. Leffler
Affiliation:
The Pennsylvania State University, Materials Research Laboratory, University Park, PA 16802
M. Bliss
Affiliation:
The Pennsylvania State University, Materials Research Laboratory, University Park, PA 16802
L. E. Cross
Affiliation:
The Pennsylvania State University, Materials Research Laboratory, University Park, PA 16802
B. E. Scheetz
Affiliation:
The Pennsylvania State University, Materials Research Laboratory, University Park, PA 16802
Get access

Abstract

Dielectric permittivity and loss tangent were measured on: 1) pressed disks of four different calcium aluminate cements shear mixed with water and poly(vinyl alcohol) and cured at room temperature and 2) laminates of SECAR 71 cement sintered at 1450°C. Post resonance and perturbation methods were used for microwave frequency measurements. Far infrared dielectric response of the cements was determined by FTIR in the diffuse reflectance mode. The real and imaginary parts of the relative dielectric permittivity were obtained via a conventional Kramers-Kronig analysis.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable