Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-19T01:28:57.742Z Has data issue: false hasContentIssue false

High Performance ITO Nanoparticles as Nanoink for Printing as a Substitute Process of Sputtering

Published online by Cambridge University Press:  14 July 2014

Atsushi Muramatsu
Affiliation:
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
Kiyoshi Kanie
Affiliation:
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
Takafumi Sasaki
Affiliation:
Mitsui Mining & Smelting Co., Ltd.
Masafumi Nakaya
Affiliation:
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
Get access

Abstract

Generally, indium-tin-oxides (ITO) thin film is prepared by the sputtering process with ITO target, but only 20% of ITO yielded from the target is deposited on the substrate. Namely, about 80% ITO is exhausted by the deposition elsewhere far from the substrate. The recycling process is limited so that ca 20% ITO of the starting target is lost without any recovery. Even if the recycling of ITO has been carried out in this process, we should prepare ITO target of 5 times more than apparent use of ITO on film. If we change it to printing process from the sputtering, the reduction in ITO use is expected as ca. 50%, considering the increase in film thickness by printing. Our target technology also includes ITO nanoink for the project. As a result, monodispersed ITO nanoparticles (NPs) with a cubic shape were fabricated by using quaternary ammonium hydroxide-assisted metal hydroxide organogels. These NPs have perfect uniformity in size with beautiful shape, and perfect single crystalline structure including Sn. As we were attempted to make thin film with ITO nanoink, it was successfully fabricated below 200 nm in thickness and the resistivity was drastically decreased below 1.0 x 10-3 Ω cm after heat treatments. GZO nanoink as substitute of ITO has also been developed.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable