Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T00:49:17.211Z Has data issue: false hasContentIssue false

High Resistivity InAIN by Nitrogen or Oxygen Implantation

Published online by Cambridge University Press:  26 February 2011

J. C. Zolper
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185–0603,
S. J. Pearton
Affiliation:
University of Florida, Department of Materials Science and Engineering, Gainesville, FL 32611
C. R. Abernathy
Affiliation:
University of Florida, Department of Materials Science and Engineering, Gainesville, FL 32611
C. B. Vartuli
Affiliation:
University of Florida, Department of Materials Science and Engineering, Gainesville, FL 32611
Get access

Abstract

We report on the isolation properties of In0.75Al0.25N implanted with either N or O for several doses and post-implant anneal temperatures. Sheet resistance versus anneal temperature data are reported for the various implants with a maximum sheet resistance of <1×109 Ω/□ achieved for a high dose N-implant annealed at 600 or 700 °C and <5×108 Ω/□ achieved for a high dose O-implant annealed at 600 °C. These sheet resistances correspond to a greater than three order of magnitude increase over the as-grown values. The compensating defect level for the highest resistance N-implanted sample has an estimate ionization level 580 meV below the conduction band edge. Implant isolation of InAIN is also compared to oxygen implant isolation of InxGa1-xN — where only a 50 to 100 fold increase in sheet resistance is observed — to study the effect of Al in the isolation scheme.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable