Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T03:16:23.558Z Has data issue: false hasContentIssue false

High Strength Nickel-Chromium-Molybdenum Microcrystalline Alloy Via Rapid Solidification Technology (Rst)

Published online by Cambridge University Press:  21 February 2011

V. Panchanathan*
Affiliation:
Marko Materials, Inc.. 144 Rangeway Road, North Billerica, MA 01862
Get access

Abstract

There is a growing national need for development of new improved materials having superior corrosion resistance combined with high mechanical strength. This paper discusses the properties and corrosion behavior of a new nickel-chromium-molybdenum microcrystalline alloy made via rapid solidification powder process, making it suitable for potential applications in corrosive environments. The alloy, called Markomet 1119, has the following composition in weight percent:

Bal Ni, 20.3Cr, 22.8Mo, 2.9Fe, 0.5B, 0.8C.

This is prepared as rapidly solidified powder by the method of a melt-spinning-pulverization process. The powder is consoldated into rods by hot extrusion. The mechanical properties and corrosion tests carried out on Markomet 1119 are reported. The microstructural feature of the alloy as investigated by SEM is also reported.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable