Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T18:52:54.761Z Has data issue: false hasContentIssue false

The High Temperature Deformation Behavior of A Cr2Nb Ordered Intermetallic System

Published online by Cambridge University Press:  26 February 2011

G. E. Vignoul
Affiliation:
Strategic Materials R&D Laboratory, The University of Texas, Austin, Texas 78721
J.M. Sanchez
Affiliation:
Strategic Materials R&D Laboratory, The University of Texas, Austin, Texas 78721
J. K. Tien
Affiliation:
Strategic Materials R&D Laboratory, The University of Texas, Austin, Texas 78721
Get access

Abstract

A basic characterization of the deformation behavior of Cr2Nb by microindention at ambient and elevated temperatures (up to 1400 °C) was undertaken. The microhardness of this system was seen to decrease with increasing temperature, from 1040 MPa at 25°C to 322 MPa at 1400 °C. Further, the microindention creep behavior of this system was studied by varying time on load at T = 1000 and 1200°C. Analysis of the data showed that m = 24 and Qapp = 477.61 kJ/mole. These unusually high values are indicative of the existence of an effective resisting stress against creep. When the data was fit against a microindention creep deformation law which was modified to incorporate an effective resisting stress term, it was determined that m = 4.5, Qcreep = 357 kJ/mole and the resisting stress term σr = 300 MPa.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable