Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T04:56:32.744Z Has data issue: false hasContentIssue false

High Temperature Deformation of a Nb-Ti-Al Alloy With σ+γ Microstructure

Published online by Cambridge University Press:  22 February 2011

Fereshteh Ebrahimi
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611
Bernardo J. G. DeAragao
Affiliation:
CpqD-Telebras, Campinas, Brazil
Get access

Abstract

An alloy with composition 27Nb-33Ti-40Al (at. %) was heat treated to produce a fine two-phase microstructure of σ (Nb2Al) and γ (TiAl) phases. This microstructure exhibited a peak in the flow curves obtained in the strain rate range 5 × 10−4 to 5 × 10−6s−1 at 1000°C, with a stress exponent of 3. The deformation occurred by dislocation activity and twinning accompanied by dynamic recrystallization of the γ-phase and extensive grain boundary sliding of the σ-phase, which resulted in the separation and fragmentation of the latter phase.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable