Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T02:34:34.970Z Has data issue: false hasContentIssue false

High Temperature Properties of Refractory Intermetallics

Published online by Cambridge University Press:  26 February 2011

D.L. Anton
Affiliation:
United Technologies Research Center
D.M. Shah
Affiliation:
United Technologies Research Center
Pratt Whitney
Affiliation:
United Technologies Research Center
Get access

Abstract

On the basis of creep strength, ultimate tensile strength and oxidation resistance, seven intermetallic compounds with melting temperatures above 1600°C have been selected as possible candidate materials for high temperature structural applications in advanced aero-turbines. These compounds, Nb3Al, Cr3Si, Co2Nb, Cr2Nb, MoSi2, Mo5Si3 and Nb2Al, have been evaluated and their properties reported herein. All seven of the compounds displayed excellent creep resistance at 1200°C with Mo5Si3 and Nb2Al being the strongest. Nb3Al, with the precipitation of the niobium solid solution displayed the greatest low temperature toughness. The greatest ultimate tensile strengths were observed for Co2Nb and MoSi2, while MoSi2 was by far the most oxidation resistant.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable