Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T08:15:07.380Z Has data issue: false hasContentIssue false

Hydriding Behaviour of Mg-C Nanocomposites

Published online by Cambridge University Press:  26 February 2011

A. Bassetti
Affiliation:
Department of Physics, University of Bologna and INFM, Bologna, Italy
E. Bonetti
Affiliation:
Department of Physics, University of Bologna and INFM, Bologna, Italy
A. L. Fiorini
Affiliation:
Department of Physics, University of Bologna and INFM, Bologna, Italy
J. Grbovic
Affiliation:
Materials and Technology Unit, ENEA C.R. Casaccia, Roma, Italy
A. Montone
Affiliation:
Materials and Technology Unit, ENEA C.R. Casaccia, Roma, Italy
L. Pasquini
Affiliation:
Department of Physics, University of Bologna and INFM, Bologna, Italy
M. Vittori Antisari
Affiliation:
Materials and Technology Unit, ENEA C.R. Casaccia, Roma, Italy
Get access

Abstract

Magnesium carbon nanocomposites for hydrogen storage have been synthesized by ball milling with different amount of benzene, acting as a lubricant. Their microstructure has been studied by X-ray diffraction and scanning electron microscopy, while the hydrogen desorption temperature has been tested by differential scanning calorimetry. Experimental results show that the microstructure after milling, the hydrogenation capabilities of the material and the reactivity with the air are related to the amount of additives. In particular the carbon to benzene ratio seems to play a major role. In fact, with an optimum value of carbon to benzene weight ratio of 1/6, the amount of carbon being 15 wt% of the milled mixture, a decomposition heat equal to 57% of pure MgH2 was measured, even after air manipulation of the sample.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable