Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T14:22:16.360Z Has data issue: false hasContentIssue false

Hydrogenated Amorphous Silicon / ZnO Shottky Heterojunction for Position Sensitive Detectors

Published online by Cambridge University Press:  17 March 2011

H. ǵuas
Affiliation:
Departamento de Ci̸ncia dos Materiais, Faculdade de Ci̸ncias e Tecnologia, Universidade Nova de Lisboa, 2825-114 Caparica –, PORTUGAL
P. Nunes
Affiliation:
Departamento de Ci̸ncia dos Materiais, Faculdade de Ci̸ncias e Tecnologia, Universidade Nova de Lisboa, 2825-114 Caparica –, PORTUGAL
E. Fortunato
Affiliation:
Departamento de Ci̸ncia dos Materiais, Faculdade de Ci̸ncias e Tecnologia, Universidade Nova de Lisboa, 2825-114 Caparica –, PORTUGAL
R. Silva
Affiliation:
Departamento de Ci̸ncia dos Materiais, Faculdade de Ci̸ncias e Tecnologia, Universidade Nova de Lisboa, 2825-114 Caparica –, PORTUGAL
V. Silva
Affiliation:
Departamento de Ci̸ncia dos Materiais, Faculdade de Ci̸ncias e Tecnologia, Universidade Nova de Lisboa, 2825-114 Caparica –, PORTUGAL
J. Figueiredo
Affiliation:
Departamento de Ci̸ncia dos Materiais, Faculdade de Ci̸ncias e Tecnologia, Universidade Nova de Lisboa, 2825-114 Caparica –, PORTUGAL
F. Soares
Affiliation:
Departamento de Ci̸ncia dos Materiais, Faculdade de Ci̸ncias e Tecnologia, Universidade Nova de Lisboa, 2825-114 Caparica –, PORTUGAL
R. Martins
Affiliation:
Departamento de Ci̸ncia dos Materiais, Faculdade de Ci̸ncias e Tecnologia, Universidade Nova de Lisboa, 2825-114 Caparica –, PORTUGAL
Get access

Abstract

In this work a new structure is proposed for position sensitive detectors consisting of glass/Cr/a-Si:H(n+)/a-Si:H(i)/ZnO, where the ZnO forms an heterojunction with the a-Si:H(i). The results show that this structure works with success in the fabrication of linear position sensitive detectors. The devices present a good nonlinearity of ͌ 2% and a good sensitivity tothe light intensity. The main advantages of this structure over the classical p-i-n are an easier to built topology and a higher yield due to a better immunity to the a-Si:H pinholes, since the ZnO does not diffuse so easily into a-Si:H as the metal does, which are the cause of frequent failure in the p-i-n devices due to short-circuits caused by the deposition of the metal over the a-Si:H. In this structure the illumination is made directly on the ZnO, so a transparent substrate is not needed and a larger range of substrates can be used.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable