Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T06:30:38.466Z Has data issue: false hasContentIssue false

Icp Etching Of SiC

Published online by Cambridge University Press:  10 February 2011

J. J. Wang
Affiliation:
Dept. Materials Science and Engineering, University of Florida, Gainesville FL 32611
E. S. Lambers
Affiliation:
Dept. Materials Science and Engineering, University of Florida, Gainesville FL 32611
S. J. Pearton
Affiliation:
Dept. Materials Science and Engineering, University of Florida, Gainesville FL 32611
M. Ostling
Affiliation:
Royal Institute of Technology, Kista, Sweden
C.-M. Zetterling
Affiliation:
Royal Institute of Technology, Kista, Sweden
J. M. Grow
Affiliation:
New Jersey Institute of Technology, Newark, NJ 07102
F. Ren
Affiliation:
Bell Laboratories, Lucent Technologies, Murray Hill, NJ 07974
Get access

Abstract

A number of different plasma chemistries, including NF3/O2, SF6/O2 , SF6/Ar, ICI, IBr, Cl2/Ar, BCl3/Ar and CH4/H2/Ar, have been investigated for dry etching of 6H and 3C-SiC in a Inductively Coupled Plasma tool. Rates above 2,000 Å·cm−1 are found with fluorine-based chemistries at high ion currents. Surprisingly, Cl2-based etching does not provide high rates, even though the potential etch products (SiCl4 and CCl4 ) are volatile. Photoresist masks have poor selectivity over SiC in F2 - based plasmas under normal conditions, and ITO or Ni are preferred.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable