Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T19:20:23.376Z Has data issue: false hasContentIssue false

Implanted 3D Micro/Nano-Structure Fabrication: New Processing Techniques for the Creation of Nanoscale Opto-Mechanical Machines in Silicon Dioxide on a Silicon wafer

Published online by Cambridge University Press:  15 March 2011

Meg Abraham*
Affiliation:
The Aerospace Corporation El Segundo, CA 90245
Get access

Abstract

A novel method of making nanoscale devices in silicon dioxide on a silicon wafer has been developed in our laboratory. The method is both inexpensive and can be fully integrated with existing VLSI type electronic processing technology. The devices are defined using conventional micronscale photolithography and then reduced in scale during the processing sequence to form nanoscale structures. Further, since the structures are defined using lithography, they can be made to span the range of scales from macro to nano in one processing step. Finally, we have found that by using laser assisted chemical etches, we can “release” these very fine structures without the damage associated with wet processes such as stiction.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable