Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T11:09:09.430Z Has data issue: false hasContentIssue false

Influence of Point Defects on GaAs Devices

Published online by Cambridge University Press:  16 February 2011

David C. Look*
Affiliation:
University Research Center, Wright State University, Dayton, OH 45435
Get access

Abstract

From electron-irriadiation studies, it is known that point defects can strongly affect the electrical properties of GaAs-based MESFET's, MODFET's, solar cells, resonant-tunneling diodes, MIMIC circuits and other devices. As an example, 1 × 1016 cm−2, 1 MeV electrons reduce the transconductance in a 1 μm by 200 μm MESFET by nearly an order of magnitude. Fortunately, annealing at 350 °C for 10 min. can largely restore the device performance, although not without some adverse effects. Point defects, or simple point defect complexes, can also exist in as-grown GaAs and affect devices in several different ways. For example, an As-rich stoichiometry can lead to an abundance of Ga vacancies, and thus to a higher Si donor activation in implanted MESFET devices; however, it can also promote an increase in unwanted impurities which sit on the Ga site. As another example, extremely high (> 3 × 1019 cm−3 ) concentrations of As arntisites, which are found in MBE GaAs grown at 200°C, lead to very unusual electrical and optical properties, and make possible a highly useful buffer material anid a very fast photoconductive switch. However, there are also adverse effects here, such as slow-transients in some MODFET devices, which may result from defect diffusion. Thus, the effects of point defects in GaAs devices must be understood.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable