Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T11:25:39.874Z Has data issue: false hasContentIssue false

Influence of Processing Parameters on Microstructure of Pulsed Laser Deposited Au Thin Films

Published online by Cambridge University Press:  26 February 2011

Andreas Kulovits
Affiliation:
akk8@pitt.edu University of Pittsburgh Dept. of Mechanical Engineering and Materials Science 848 Benedum Hall Pittsburgh PA 15261 United States
John Leonard
Affiliation:
jleonard@pitt.edu, University of Pittsburgh, Dept. of Mechanical Engineering and Materials Science, 848 Benedum Hall, Pittsburgh, PA, 15261, United States
Jorg Wiezorek
Affiliation:
wiezorek@pitt.edu, University of Pittsburgh, Dept. of Mechanical Engineering and Materials Science, 848 Benedum Hall, Pittsburgh, PA, 15261, United States
Get access

Abstract

It has long been recognized that thin film polycrystalline microstructures are determined by the thermodynamics and kinetics associated with physical vapor deposition, but it is quite process dependent and not easily quantified. We have examined the microstructure in polycrystalline Au films obtained by pulse laser deposition (PLD) under various conditions and interpret the results in terms of three fundamental parameters common to all physical vapor deposition: Flux kinetic energy, substrate temperature, and deposition rate. With this model, it is predicted that nanocrystalline films are formed in the limits of low temperature, flux, and high deposition rate. The deposited films are analyzed with X-ray diffraction and SEM to determine texture and grain morphology, which are found to fit well within the process maps.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable