Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T16:29:22.471Z Has data issue: false hasContentIssue false

Influence of Tipradius and Substrate on the Nanotribological Characterization of Thin DLC Coatings

Published online by Cambridge University Press:  17 March 2011

Thorsten Staedler
Affiliation:
Fraunhofer Institute for Surface Engineering and Thin Films, Braunschweig, GERMANY
Kirsten I. Schiffmann
Affiliation:
Fraunhofer Institute for Surface Engineering and Thin Films, Braunschweig, GERMANY
Get access

Abstract

In this work diamond-like carbon films deposited via plasma enhanced chemical vapor deposition with a thickness of 250nm on different substrates are characterized by nanoindentation and microscratching in combination with scanning probe microscopy. The substrates (SU8 photoresist, quartz glass, Si(100) and AlTiC ceramic) provide a wide range of combinations between film and substrate properties. The experimental configuration allows the testing of samples with loads between 1μN and 10mN and a high local resolution. The tribological response of the various film/substrate systems is analysed in two different ways. A single scratch test with linear increasing load and an oscillating wear tests at constant loads is used. The tip radii of the conical diamond tips utilized vary between 0.6 and 6μm. Both, the substrates as well as the tip radii, show a significant influence on the tribological behavior of the systems.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable