Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T10:25:34.667Z Has data issue: false hasContentIssue false

Influence of Underlayer and Encapsulation Process on Texture in Polycrystalline Silver Thin Films

Published online by Cambridge University Press:  10 February 2011

Yuxiao Zeng
Affiliation:
Department of Chemical, Bio and Materials Engineering, Center for Low Power Electronics
Y. L. Zou
Affiliation:
Department of Chemical, Bio and Materials Engineering, Center for Low Power Electronics
T. L. Alford
Affiliation:
Department of Chemical, Bio and Materials Engineering, Center for Low Power Electronics
F. DENG
Affiliation:
Department of Electrical and Computer Engineering, University of California at San Diego, La Jolla, CA 92093
S. S Lau
Affiliation:
Department of Electrical and Computer Engineering, University of California at San Diego, La Jolla, CA 92093
T. Laursen
Affiliation:
Center for Solid State Science, Arizona State University, Tempe, AZ 85287
B. Manfred Ullrich
Affiliation:
Center for Solid State Science, Arizona State University, Tempe, AZ 85287
Get access

Abstract

The texture in polycrystalline Ag thin films prepared by e-beam evaporation has been characterized by an x-ray diffraction technique as a function of underlayers and encapsulation temperatures. The Ag films deposited on Ti layers showed a strong <111> fiber texture with a fiber axis parallel to the film normal, whereas an almost random orientation was observed in the Ag films on Cr layers. This underlayer dependence of texture is associated with the lattice match between Ag and underlayer metal. In addition to <111> texture, the Ag films on Ti also exhibited a <511> texture component, which is the result of twinning of <111> -oriented grains. After the encapsulation process, the <111> texture in the Ag films on Ti was significantly improved, as evidenced by an increased (111) diffraction intensity and a slightly narrower space distribution of the texture along the fiber axis. The highly textured Ag films are expected to exhibit an improved electromigration resistance.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable