Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T05:35:56.573Z Has data issue: false hasContentIssue false

Interface Roughness Effects on Adhesion of Ta2N Films.

Published online by Cambridge University Press:  22 February 2011

N. R. Moody
Affiliation:
Sandia National Laboratories, Livermore, CA 94551-0969
S. Venkataraman
Affiliation:
University of Minnesota, Minneapolis, MN 55455
J. Nelson
Affiliation:
University of Minnesota, Minneapolis, MN 55455
W. Worobey
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185-0957
W. W. Gerberich
Affiliation:
University of Minnesota, Minneapolis, MN 55455
Get access

Abstract

In this study, we employed continuous microscratch testing to determine the effects of interface roughness on adhesion and fracture toughness of thin Ta2N films. These films were sputterdeposited on single crystal sapphire and polycrystal alumina substrates to a thickness of 0.5 μm. Comparison of the results showed that the interfacial fracture energy increased from 0.4 J/m2 for films on the single crystals to 1.5 J/m2 for films on the polycrystals with a corresponding increase in fracture toughness values. These results are consistent with crack deflection and interface roughness models and are useful for understanding adhesion and toughness on the submicron scale. The results also show that the continuous microscratch technique is a viable approach to determining adhesion and toughness of bi-material systems.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable