Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-15T20:24:18.348Z Has data issue: false hasContentIssue false

Interface Stability During Solid Phase Epitaxy Of Strained Ge xS1-x Films on Si (100)

Published online by Cambridge University Press:  15 February 2011

Xiaobiao Zeng
Affiliation:
Department Of Materials Science And Engineering, Cornell University, Ithaca, Ny 14853
Tan-Chen Lee
Affiliation:
Department Of Materials Science And Engineering, Cornell University, Ithaca, Ny 14853
John Silcox
Affiliation:
Department Of Materials Science And Engineering, Cornell University, Ithaca, Ny 14853
Michael O. Thompson
Affiliation:
Department Of Materials Science And Engineering, Cornell University, Ithaca, Ny 14853
Get access

Abstract

Strained solid phase epitaxial (SPE) regrowth of amorphous Ge xSi1-x on Si (100) substrates was studied using time-resolved reflectivity(TRR). Films of CVD-grown Ge0.13Si0.87 on Si wereamorphized by Si ion implantation, and subsequently regrown at temperaturesbetween 550°C and 610°. Information on regrowth dynamics and interfaceroughness evolution was obtained by accurately modeling the complicated TRRdata for Ge xSi1-x regrowth using a Moving, statistically roughening interface. The SPEregrowth rate slowed as the interface crossed into the Ge xSi1-x layer and the originally planar interface roughened, as confirmed bytransmission electron Microscopy. A Minimum in the regrowth velocity wasobserved after regrowing approximately 60 nm into the Ge xSi1-x layer; the SPE rate subsequently increased to a final,thickness-dependent velocity that was still below that for pure Si. Uponentering the Ge xSi1-x layer, the interface roughened quickly to a 15–20 nm amplitude,increasing only slightly more during the remainder of regrowth. The degreeof roughening and velocity reduction was found to be dependent on the annealtemperature. In contrast, samples with low Ge concentrations (< 3 at.%)prepared by ion implantation exhibited minimal interface roughening andessentially identical SPE velocities as pure Si.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable