Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T15:05:18.640Z Has data issue: false hasContentIssue false

Investigating the surface changes of silicon in vitro within physiological environments for neurological application

Published online by Cambridge University Press:  25 March 2014

Maysam Nezafati
Affiliation:
University of South Florida, Department of Electrical Engineering 4202 E Fowler Ave, Tampa, FL 33620, U.S.A.
Stephen E. Saddow
Affiliation:
University of South Florida, Department of Electrical Engineering 4202 E Fowler Ave, Tampa, FL 33620, U.S.A.
Christopher L. Frewin
Affiliation:
University of South Florida, Department of Electrical Engineering 4202 E Fowler Ave, Tampa, FL 33620, U.S.A.
Get access

Abstract

Silicon has been used as one of the primary substrates for micro-machined intra-cortical neural implants (INI). The presence of various ions in the extracellular environment combined with cellular biological activity establishes a harsh, corrosive environment in the brain for INI, and as such, a long-term implant’s construction materials must be able to resist these environments. We have examined if environmental components could contribute to changes in the material, which in turn may be a contributing factor to the decreased long-term reliability in INI optimal neural recordings, which have prevented clinical use these devices for the last 4 decades. We tested silicon in artificial cerebrospinal fluid (ACSF), Dulbecco's modified eagle medium (DMEM), and H4 cells cultured within DMEM for 96 hours at 37°C as three various physiological environments to investigate the material degradation. We have observed that Si samples immersed in only DMEM and ACSF showed very minor surface alterations. However, Si samples cultured with H4 cells exhibited a large change in surface roughness from 0.24±0.04 nm to 4.85 nm. The scanning electron microscope (SEM) micrographs showed the presence of pyramid shaped pits. Further characterization with atomic force microscope (AFM) verified this result and quantified the severe changes in the surface roughness of these samples. At this initial stage of the investigation, we are endeavoring to identify the cause of these changes to the Si surface, but based on our observations, we believe that the increased corrosion could be result of chemical products released into the surrounding environment by the cells.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable