Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T17:12:49.952Z Has data issue: false hasContentIssue false

Ion Beam Analysis of Diffusion in Polymer Melts

Published online by Cambridge University Press:  22 February 2011

P. F. Green
Affiliation:
Dept. of Materials Science and Engineering and the Materials Science Center, Cornell University, Ithaca, NY 14853
P. J. Mills
Affiliation:
Dept. of Materials Science and Engineering and the Materials Science Center, Cornell University, Ithaca, NY 14853
C. J. Palmstrom
Affiliation:
Dept. of Materials Science and Engineering and the Materials Science Center, Cornell University, Ithaca, NY 14853
J. W. Mayer
Affiliation:
Dept. of Materials Science and Engineering and the Materials Science Center, Cornell University, Ithaca, NY 14853
E. J. Kramer
Affiliation:
Dept. of Materials Science and Engineering and the Materials Science Center, Cornell University, Ithaca, NY 14853
Get access

Abstract

Two ion beam depth profiling methods have been used to measure the diffusion of polymer chains of molecular weight M into a matrix of polymer of molecular weight P. In the first the displacement xm of Au markers at the original interface of a diffusion couple between polystyrene with P=2×107 and a thin film of PS with M<P is measured using Rutherford backscattering spectrometry. From this modern version of the Kirkendall effect we find x=0.4t8(D*t) 0 5, where D* the tracer diffusion coefficient of the M chains at 174°C, is found to be D*=O.007M−2cm2/sec, in good agreement with the D*=DR expected for the reptation mechanism. Forward recoil spectrometry, a technique in which the energies of recoiling deuterons are detected, is used to obtain concentration profiles, and hence D*, of deuterated PS M-chains diffusing into a hydrogenated PS P-chain matrix. When P>>M, D*=0.008M−2, in good agreement with the marker data. When P<P*(M) however D*; increases greatly as P decreases; P* increases slowly with increasing M. The results are predicted quantitatively by D*=DR+DCR, where DCR=0.10Me 2/(Mp 3 ) describes the diffusion of the M-chain by release of its topological constraints (by diffusion of the surrounding P-chains) and Me is an entanglement molecular weight. D* for self-diffusion (M=P) is dominated by reptation except for M's close to Me.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable