Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T12:03:48.346Z Has data issue: false hasContentIssue false

Ion Track Enabled High Aspect Ratio Flexible PCB Via Technology

Published online by Cambridge University Press:  01 February 2011

Mikael Lindeberg
Affiliation:
Dept. of Engineering Sciences, The Ångström Laboratory, Uppsala University Box 534, SE-751 21 Uppsala, Sweden
Hanna Yousef
Affiliation:
Dept. of Engineering Sciences, The Ångström Laboratory, Uppsala University Box 534, SE-751 21 Uppsala, Sweden
Erik Öjefors
Affiliation:
Dept. of Engineering Sciences, The Ångström Laboratory, Uppsala University Box 534, SE-751 21 Uppsala, Sweden
Anders Rydberg
Affiliation:
Dept. of Engineering Sciences, The Ångström Laboratory, Uppsala University Box 534, SE-751 21 Uppsala, Sweden
Klas Hjort*
Affiliation:
Dept. of Engineering Sciences, The Ångström Laboratory, Uppsala University Box 534, SE-751 21 Uppsala, Sweden
*
* corresponding author's e-mail: klas.hjort@angstrom.uu.se
Get access

Abstract

By combining ion track technology with ordinary low-resolution printed circuitboard lithography it is possible at low cost to create high aspect ratios via connectors, as solid plugs or consisting of bundles of sub-micron connector wires at a small total cross-section.

Ion track enabled microwave circuits in flexible printed circuit boards are suggested to be used in applications like inductors, ferromagnetic resonance microwave filters, circulators and magnetoresistive sensors. In this paper we demonstrate this technology with integrated printed circuitboard devices in two different flexible polyimide-based foils (Espandex and Kapton HN), using the ultra-high-density vias and the sub-micron wires.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable