Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T04:56:32.609Z Has data issue: false hasContentIssue false

Irradiation-Induced Changes in the Mechanical Properties and Microstructures of Solution Annealed Austenitic Stainless Steel at Low to Intermediate Temperatures

Published online by Cambridge University Press:  15 February 2011

G. E. Lucas*
Affiliation:
Department of Mechanical and Environmental Engineering and Department of Chemical Engineering, University of California, Santa Barbara, CA 93106, gene@engineering.ucsb.edu
Get access

Abstract

The evolution of the microstructure of solution annealed austenitic stainless steels irradiated by neutrons at temperatures less than 300°C is dominated by black spots and Frank loops. This leads to hardening and a degradation of ductility and work hardening accompanied by a loss of fracture toughness. Microscopic flow localization is attributed to the annihilation of loops by their interaction with moving dislocations. The resulting loss of work hardening can lead to flow localization on a macroscopic scale as well in the vicinity of notches, holes and cracks. The combination of macro and microscopic flow localization may have important implications to the failure modes available to structures and to irradiation-assisted stress corrosion cracking.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable