Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T18:06:36.770Z Has data issue: false hasContentIssue false

Large Area Cu(In,Ga)Se2 Films and Devices on Flexible Substrates Made by Sputtering

Published online by Cambridge University Press:  01 February 2011

Dennis R. Hollars
Affiliation:
San Jose, CA 95131, U.S.A.
Randy Dorn
Affiliation:
San Jose, CA 95131, U.S.A.
P. D. Paulson
Affiliation:
San Jose, CA 95131, U.S.A.
Jochen Titus
Affiliation:
San Jose, CA 95131, U.S.A.
Robert Zubeck Miasolé
Affiliation:
San Jose, CA 95131, U.S.A.
Get access

Abstract

A reactive sputtering process was developed for the production of Cu(In,Ga)Se2 films on a moving stainless steel substrate, in simulation of the operation of a roll coater. Cu, In and Ga fluxes were provided through magnetron sputtering and were reacted in a flux of Se on the heated substrate. CdS films were deposited either by chemical bath deposition (CBD) or by sputtering. Devices of the type steel/Cr/Mo/CIGS/CdS/ZnO/Ag were completed by sputtering ZnO layers and by screen printing grid lines. We made devices with efficiency values above 9%. A uniformity study was performed on a CIGS film and on small area devices made from it. The target length was 12”. Targets of this size are expected to produce a uniformly thick deposit over a range of 6-8”. The film thickness was 2.54 μm over a range of 6” with a standard deviation ó of 0.04 μm. The film composition was uniform over a range of 16”. The values of Cu/III and Ga/III were 0.84 and 0.31, with ó values of 0.02 and 0.01, respectively. The efficiency of allsputtered devices was uniform over a range of 12”, well beyond the 6” wide range of constant CIGS film thickness. Their efficiency was 6.6% on average with ó=0.6%.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable