Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T06:56:40.138Z Has data issue: false hasContentIssue false

Large Scale Periodic Magnetic Nanostructures Fabricated by Optical Interference Lithography

Published online by Cambridge University Press:  15 March 2011

A. Carl
Affiliation:
Gerhard-Mercator-Universität Duisburg, Tieftemperaturphysik, 47048 Duisburg, Germany
S. Kirsch
Affiliation:
Gerhard-Mercator-Universität Duisburg, Tieftemperaturphysik, 47048 Duisburg, Germany
E.F. Wassermann
Affiliation:
Gerhard-Mercator-Universität Duisburg, Tieftemperaturphysik, 47048 Duisburg, Germany
Get access

Abstract

Large scale periodic arrays of Co/Pt multilayer dots with perpendicular magnetic anisotropy are fabricated utilizing optical interference lithography with Ar+ ion lasers operating at wavelengths of 457nm and 244nm, respectively. The experimental technique allows us to fabricate dot-arrays with periodicities ranging between 125nm and 1100nm and with corresponding dot diameters between 70nm and 740nm. The dot-arrays are prepared on (100)-silicon substrates covering a total area of up to 20cm2 with a maximum dot density of about 4.1x1010dots/in2 as well as within the surface of (110)-silicon substrates. The global magnetic properties of the dot-arrays are characterized by the magneto-optical Kerr effect. The micromagnetic properties of a single Co/Pt dot are measured with quantitative magnetic force microscopy (QMFM) by using a MFM-tip, the magnetic properties of which have been calibrated within the point probe approximation with nanofabricated current carrying rings. This allows us to measure quantitatively the z-component of both the magnetization and the stray field of a Co/Pt dot on the nanometer scale.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable