Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T07:50:17.686Z Has data issue: false hasContentIssue false

Laser Induced Controlled Nucleation and Growth Process For Large Grained Polycrystalline Silicon*

Published online by Cambridge University Press:  15 February 2011

S.C. Danforth
Affiliation:
Energy Laboratory and Department of Materials Science, Massachusetts Institute of Technology, Room 12–063, Cambridge, Massachusetts 02139
F. Van Gieson
Affiliation:
Energy Laboratory and Department of Materials Science, Massachusetts Institute of Technology, Room 12–063, Cambridge, Massachusetts 02139
J.S. Haggerty
Affiliation:
Energy Laboratory and Department of Materials Science, Massachusetts Institute of Technology, Room 12–063, Cambridge, Massachusetts 02139
I. Kohatsu
Affiliation:
Energy Laboratory and Department of Materials Science, Massachusetts Institute of Technology, Room 12–063, Cambridge, Massachusetts 02139
Get access

Abstract

Research on a new process is described which utilized a laser to achieve controlled crystallization of amorphous Si thinfilms for photovoltaic applications. Amorphous Si films are deposited on suitable substrates using RF sputtering. A laser is used to inoculate these films with crystalline embryos at specific locations. These embryos should then grow in a controlled atmosphere annealing furnace under conditions optimized to maintain the nucleation rate at zero and the transformation rate (from amorphous to crystalline silicon) at a maximum value. The result will be a polycrystalline silicon film with a large grain size to film thickness ratio, where the ultimate grain size will be determined by the laser inoculation spacing.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable