Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T03:22:38.266Z Has data issue: false hasContentIssue false

Laser-Induced Crystallization of SiGe MEMS Structural Layers Deposited at Temperatures Below 250°C

Published online by Cambridge University Press:  31 January 2011

Joumana El-Rifai
Affiliation:
joerifai@aucegypt.edu, Youssef Jameel Science and Technology Research Center, The American University in Cairo, Cairo, Egypt
Sherif Sedky
Affiliation:
sedky@aucegypt.edu, The American University in Cairo, Physics Department, Cairo, Egypt
Rami Wasfi
Affiliation:
ramiwasfi@gmail.com, Youssef Jameel Science and Technology Research Center, The American University in Cairo, Cairo, Egypt
Chris Van Hoof
Affiliation:
vanhoofc@imec.be, IMEC, Leuven, Belgium
Ann Witvrouw
Affiliation:
witvrouw@imec.be, IMEC, Leuven, Belgium
Get access

Abstract

This work is a step towards a viable process for poly-SiGe MEMS structural layers deposited at substrate temperatures below 250°C. Laser annealing was used for post-deposition layer treatment to realize poly-SiGe structural layers with the desired electrical and mechanical properties at low substrate temperatures. The technique uses a pulsed excimer laser beam for the local thermal treatment of a SiGe layer deposited by Plasma Enhanced Chemical Vapor Deposition (PECVD) at 210°C. By tuning the laser treatment and the film deposition conditions, 1-1.8 μm thick films having an electrical resistivity as low as 14.1 mΩ∙cm and optimal strain gradient in the range of -4.3×10-6 to +6.8×10-6 μm-1 were realized.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable