Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-19T04:58:04.165Z Has data issue: false hasContentIssue false

Laser-Solid Interaction and Dynamics of the Laser-Ablated Materials

Published online by Cambridge University Press:  21 February 2011

K. R. Chen
Affiliation:
Oak Ridge National Laboratory, P. 0. Box 2009, Oak Ridge, TN 37831-8071, USA
J. N. Leboeuf
Affiliation:
Oak Ridge National Laboratory, P. 0. Box 2009, Oak Ridge, TN 37831-8071, USA
D. B. Geohegan
Affiliation:
Oak Ridge National Laboratory, P. 0. Box 2009, Oak Ridge, TN 37831-8071, USA
R. F. Wood
Affiliation:
Oak Ridge National Laboratory, P. 0. Box 2009, Oak Ridge, TN 37831-8071, USA
J. M. Donato
Affiliation:
Oak Ridge National Laboratory, P. 0. Box 2009, Oak Ridge, TN 37831-8071, USA
C. L. Liu
Affiliation:
Oak Ridge National Laboratory, P. 0. Box 2009, Oak Ridge, TN 37831-8071, USA
A. A. Puretzky
Affiliation:
Oak Ridge National Laboratory, P. 0. Box 2009, Oak Ridge, TN 37831-8071, USA
Get access

Abstract

Rapid transformations through the liquid and vapor phases induced by laser-solid interactions are described by our thermal model with the Clausius-Clapeyron equation to determine the vaporization temperature under different surface pressure condition. Hydrodynamic behavior of the vapor during and after ablation is described by gas dynamic equations. these two models are coupled. Modeling results show that lower background pressure results lower laser energy density threshold for vaporization. the ablation rate and the amount of materials removed are proportional to the laser energy density above its threshold. We also demonstrate a dynamic source effect that accelerates the unsteady expansion of laser-ablated material in the direction perpendicular to the solid. a dynamic partial ionization effect is studied as well. a self-similar theory shows that the maximum expansion velocity is proportional to cs/α, where 1 – α is the slope of the velocity profile. Numerical hydrodynamic modeling is in good agreement with the theory. With these effects, α. is reduced. therefore, the expansion front velocity is significantly higher than that from conventional models. the results are consistent with experiments. We further study the plume propagates in high background gas condition. Under appropriate conditions, the plume is slowed down, separates with the background, is backward moving, and hits the solid surface. then, it splits to be two parts when it rebounds from the surface. the results from the modeling will be compared with experimental observations where possible.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable