Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T19:26:19.438Z Has data issue: false hasContentIssue false

Localized Deformation at Interfaces and Its Role in Intergranular Cavitation at High Temperatures

Published online by Cambridge University Press:  26 February 2011

L.C. Lim*
Affiliation:
Department of Mechanical and Production Engineering, National University of Singapore, Kent Ridge, Singapore 0511
Get access

Abstract

At elevated temperatures, crystal dislocations impinging onto the grain boundary become trapped and are confined to move in the interface. They form pile-ups at places where their movements are impeded in the interface the strength of which is determined by the rate of slip impingement and that of recovery in the interface. During steady state creep, a ‘steady state’ pile-up of grain boundary dislocations (GBDs) will form in the interface, providing a condition conducive to the formation of creep cavities. Calculations have shown that cavity nucleation ahead of a GBD pile-up during steady state creep is feasible under usual creep conditions in single-phase metals and alloys. It has also shown that solutes and impurities can exert a profound influence on the cavitation behavior of materials. For a solute/impurity which is surface active, which retards boundary diffusion and reduces the creep resistance of the material, it could reduce the threshold stress for cavitation failure by about an order of magnitude, thereby rendering the material highly susceptible to cavitation damage.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable