Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T07:20:16.736Z Has data issue: false hasContentIssue false

Long Fiber Reinforced Sol-Gel Derived Al2O3 Composites

Published online by Cambridge University Press:  15 February 2011

J. J. Lannutti*
Affiliation:
Ceramics Division, Materials Science and Engineering, University of Florida, Gainesville, Florida 32611
D. E. Clark*
Affiliation:
Ceramics Division, Materials Science and Engineering, University of Florida, Gainesville, Florida 32611
*
*Nicalon, From Hexcel, Dublin, California
**Saffil, From ICI, Wilmington, Delaware
Get access

Abstract

A simple casting technique was used to fabricate composites comprised of long fibers in an alumina matrix. Random fiber preforms were placed in trays and subsequently a liquid alumina sol was added and gelled. Dried sheets approximately 6 cm in diameter and 0.2 cm thick were prepared without cracking. The addition of glycerol to the sol improved drying properties, made the dry gel flexible, and permitted the lamination (plying) of several sheets.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable