Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T07:17:34.300Z Has data issue: false hasContentIssue false

Low-Contact-Resistance Contacts to Graphene via Metal-Mediated Etching

Published online by Cambridge University Press:  17 July 2013

Wei Sun Leong
Affiliation:
Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576
John T.L. Thong*
Affiliation:
Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576
Get access

Abstract

The theoretically-predicted enhancement of metal-graphene contacts using the “end-contacted” configuration is studied. Graphene edges at the source/drain regions are created via a CMOS process compatible metal-assisted etching technique. The on-resistance of a graphene device with cobalt-etched-graphene contacts shows 6 times improvement compared to pristine graphene device. Apart from that, four-point contacted graphene devices with nickel-etched-graphene contacts were fabricated and tested under ambient conditions. The proposed graphene devices exhibit contact resistance as low as 14 Ωμm, with an average of 90 Ωμm. Thus, forming metal-etched-graphene contacts is a promising method to obtain low-contact resistance metal contacts to graphene.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable