Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T14:46:42.873Z Has data issue: false hasContentIssue false

Manipulation of Wetting Directions Using Nanostructures with Asymmetric Surface Energies

Published online by Cambridge University Press:  20 February 2014

Changquan Lai
Affiliation:
Singapore MIT Alliance, National University of Singapore, Singapore 117576, Singapore.
Carl V. Thompson
Affiliation:
Singapore MIT Alliance, National University of Singapore, Singapore 117576, Singapore.Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
W.K. Choi
Affiliation:
Singapore MIT Alliance, National University of Singapore, Singapore 117576, Singapore.Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576, Singapore.
Get access

Abstract

Ordered arrays of polymeric nanostructures with different shapes were generated using laser interference lithography and plasma etching. Surface energy anisotropy was produced in each nanostructure in the array through oblique angle deposition of a hydrophilic metal. When a water droplet was placed on such a surface, it was found to wet preferentially in the direction of the hydrophilic face. Depending on the shape of the nanostructure and the deposition direction, wetting can be made uni-, bi- or tri-directional. Insights obtained in this study contribute to the understanding of wetting on rough, chemically heterogeneous surfaces and provide new methods to engineer functional surfaces for the control of wetting directions.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable