Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T05:39:32.776Z Has data issue: false hasContentIssue false

Manufacturability Issues for Application of Silicides In 0.25 μm CMOS Process and Beyond

Published online by Cambridge University Press:  15 February 2011

Q. F. Wang
Affiliation:
IMEC, Kapeldreef 75, 3001 Leuven, Belgium
A. Lauwers
Affiliation:
IMEC, Kapeldreef 75, 3001 Leuven, Belgium
F. Jonckx
Affiliation:
IMEC, Kapeldreef 75, 3001 Leuven, Belgium
M. de Potter
Affiliation:
IMEC, Kapeldreef 75, 3001 Leuven, Belgium
Chun-Cho Chen
Affiliation:
IMEC, Kapeldreef 75, 3001 Leuven, Belgium
K. Maex
Affiliation:
IMEC, Kapeldreef 75, 3001 Leuven, Belgium
Get access

Abstract

Key issues associated with the self-aligned silicide technology, such as formation of silicides on narrow poly gate, shallow silicided junction formation, gate to source/drain bridging, and interface contact resistance, are discussed. The comparison of important technological aspects for TiSi2 and CoSi2 is presented. The emphasis of this work is focused on the CoSi2 salicide technology with different variations, namely conventional process, Co/Ti capping process, and Ti/Co process. Based on the experimental results, CoSi2 should be considered as an attractive alternative to TiSi2 for the applications in sub-0.25 μm ULSI integrated circuits.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable